Preset Operation; Mode Prereglage; Betrieb Mit Voreinstellungen; Funzioni Preset - Toshiba RAV-SM562KRT-E Owner's Manual

PRESET OPERATION

Memorize the frequently used operation setting by the PRESET button
for convenience.
Start the air conditioner in the operation mode which you want the
remote controller to memorize.
Push the button as follows while the air conditioner is in operation.
1 PRESET button 1 1
1 1
Push and hold this button for more than 3 seconds while the
display flashes.
All the icons currently displayed except for the clock display and
mark flashes.
The mark is indicated and the setting is memorized.
•
If you do not push the PRESET button within 3 seconds or if you
push another button, the PRESET setting is cancelled.
•
Operation modes which can be memorized with the PRESET
button are MODE, Temperature, FAN, TIMER, Hi POWER, ECO
and QUIET.
To operate the air conditioner with the setting memorized by the
PRESET button.
1 1 1 PRESET button 1 1
Push the PRESET button. The setting memorized with the
PRESET button will be indicated and the air conditioner operates
with regards to the setting.
•
The lamp (green) on the display panel of the indoor unit goes
on, and operation starts after approximately 3 minutes.
•
Initial setting:
MODE
Temperature
EN
: AUTO
: 22
13
1