Installation Manual - Navien NPE-180A Installation Manual

Condensing water heater
Hide thumbs Also See for NPE-180A:
Table of Contents

Advertisement

WARNING
If the information in these instructions is not followed exactly, a fire or explosion may result, causing
property damage, personal injury, or death.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas
supplier.
The installation must conform with local codes or, in the absence of local codes, the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.
When applicable, the installation must conform with the Manufactured Home Construction and
Safety Standard, Title 24 CFR, Part 3280 and/or CAN/CSA Z240 MH Series, Mobile Homes.
Condensing Water Heater
Installation
Manual
Model
NPE-180A/ 210A/ 240A
NPE-180S/ 210S/ 240S
Keep this manual near this water heater for future reference
whenever maintenance or service is required.
Certified for installation in a manufactured (mobile) home.
* The wetted surface of this product contacted by
consumable water contains less than one quarter of one
percent(0.25%) of lead by weight.
* Lead Free

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Npe-240aNpe-210a

Table of Contents