Attaching/Detaching The Stand - Sharp LC-32CHE5221K User Manual

Attaching/detaching the stand

ATTACHING THE STAND
Attaching the stand/feet
To complete the stand/feet installation you will require a cross head screw driver.
Screws that are included.
4 x
TV panel must be facing downwards.
1
2
3
Detaching the stand
Remove the screws highlighted then remove the stand/feet from the underside of the TV set.
R
L
R
1
2
4 x
L
(fi g.1) Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage, then
fi x the stand/feet shown. The feet are
marked L (left) and R (right).
(fi g.2) When the stand feet are
installed correctly, the stand/feet
will be angled away from each
other at the front of the TV set.
3
4
(fi g.2) Secure the stand/feet to
the underside of the TV set using
the 4 screws provided.
9 9