Camshaft Removal - KYMCO PEOPLE S 125 Service Manual

7
. CYLINDER HEAD/VALVES

CAMSHAFT REMOVAL

Remove the center cover.
Remove the four cylinder head cover bolts
and secondary air inlet tube bolts to remove
the cylinder head cover.
Remove the cam chain tensioner cap screw
and the O-ring.
Turn the cam chain tensioner screw
clockwise to tighten it.
Turn the flywheel counterclockwise so that
the "T" mark on the flywheel aligns with the
index mark on the crankcase to bring the
round hole on the camshaft gear facing up to
the top dead center on the compression
stroke.
7-5
Cylinder Head Cover
Bolts
Bolts
O-ring
Tensioner Screw
Camshaft Gear
Round Hole
Punch Marks
PEOPLE S 4T