Specification - Biostar iDEQ-T1 IN2940T1 Setup Manual

Specification

iDEQ-T1 IN2940T1: Intel® Celeron® Processor N2940 (2M Cache, up to 2.25 GHz)
Processor
iDEQ-T1 IJ1800T1: Intel® Celeron® Processor J1800 (1M Cache, up to 2.58 GHz)
Graphics Integrated Intel® HD Graphics series graphic engine
Supports Dual Channel DDR3L 1333 (1.35V/1.5V)
2x DDR3L SO-DIMM Memory Slot, Max. Supports up to 16 GB Memory
Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3L module
* Please refer to www.biostar.com.tw for Memory support list.
LAN (RTL8111G)
Networking
WLAN (Wi-Fi module sold separately)
Audio Realtek Codec ALC662, Support 2x Port with Line out / MIC in
Storage 1x SATA II connector, data transfer rates up to 3.0Gb/s
DC jack (19V DC-in)
USB 3.0 port
USB 2.0 port
RJ-45 Gigabit Lan port
Rear I/O
HDMI connector
VGA connector
Line-Out
Mic-In
USB 2.0 port
Front I/O
Power on button
Operation Temperature
Environment Storage Temperature
Relative Humidity
Power Supply 19V/45W
Windows 7 / 8 / 8.1
OS Support
Biostar reserves the right to add or remove support for any OS with or without notice.
Foot stand
Mounting
VESA 75/100 Mount Bracket (Optional)
Dimension 210mm (L) x 40mm (W) x 185mm (H)
Weight 0.8 kg
Regulatory
CE/FCC
Compliance
iDEQ-T1 Setup Manual
2
1x Gigabit Ethernet, RJ-45 Port
1x Mini PCIe Connector
1x
1x
1x
1x
1x
1x
1x
1x
2x
1x
0°C ~ 40°C (32°F ~ 100°F)
-20°C ~ 60°C (-4°F ~ 140°F)
20% ~ 80% non-condensing