Using Setup - Biostar iDEQ-T1 IN2940T1 Setup Manual

Using Setup

When starting up the computer, press <Del> during the Power-On Self-Test
(POST) to enter the UEFI BIOS setup utility.
In the UEFI BIOS setup utility, you will see General Help description at the top
right corner, and this is providing a brief description of the selected item.
Navigation Keys for that particular menu are at the bottom right corner, and you
can use these keys to select item and change the settings.
<Notice>
 The default UEFI BIOS settings apply for most conditions to ensure optimum performance of
the motherboard. If the system becomes unstable after changing any settings, please load the
default settings to ensure system's compatibility and stability. Use Load Setup Default under
the Exit Menu.
For better system performance, the UEFI BIOS firmware is being continuously updated. The

UEFI BIOS information described in this manual is for your reference only. The actual UEFI
BIOS information and settings on board may be slightly different from this manual.
 The content of this manual is subject to be changed without notice. We will not be responsible
for any mistakes found in this user's manual and any system damage that may be caused by
wrong-settings.
iDEQ-T1 Setup Manual
General Help
Navigation Keys
10