Dyna-Glo DGA550SSN User Manual page 15

ASSEMBLY INSTRUCTIONS
WARNING: IT IS VERY IMPORTANT TO
CHECK AND ENSURE THAT EACH AND
EVERY BURNER IS FULLY ENGAGED
WITH THE ADJACENT VALVE ORIFICE
BEFORE COMPLETING STEP 22.
FAILURE TO DO SO MAY RESULT
IN FIRE OR EXPLOSION, POSSIBLY
CAUSING SERIOUS INJURY OR DEATH.
REFER TO MAINTENANCE SECTION
INSTRUCTIONS TO PROPERLY CHECK
THE ENGAGEMENT.
22. Open the lid of the grill body (O) and place
the five heat tents (X) on the brackets directly
above the burners.
23. Place three cooking grates (Y) on the grill body
braces and grill rear panel.
22
23
15
WARNING
Burner
Valve
Orifice
X
Y