Dyna-Glo DGA550SSN User Manual page 13

ASSEMBLY INSTRUCTIONS
16. Align the key holes in the left shelf (P) with the
two M6x16 screws (FF) just installed in the
grill body (O) and tighten screws. Insert three
M6x16 screws (FF) in the remaining holes in the
supports and tighten.
Hardware Used
FF
M6x16 Screw
17. Align the side burner tubing with the side burner
orifice and insert into the side burner orifice.
Use two M4x10 screws (DD) to secure the side
burner orifice and side burner orifice support to
the side burner support.
Hardware Used
DD
M4x10 Screw
18. Attach the ignition wiring to the electrode.
16
P
FF
x 3
17
x 2
DD
2
18
13
1
1
O
2