Dyna-Glo DGA550SSN User Manual page 10

ASSEMBLY INSTRUCTIONS
7. Partially insert two M6x12 screws (AA) into the
cart left and right side panels (D & E). Attach
upper front door brace (G) to the four M6x12
screws (AA). Tighten the screws.
Hardware Used
AA
M6x12 Screw
8. Remove preassembled M4x10 screws (GG) from
the door handles (J). Insert two door handle
sleeves (K) into the holes located on the back
of the left door assembly (H). Insert two M4x10
screws (GG) into the door handle sleeves (K)
and into the threaded holes in the door handle
(J). Tighten the screws. Repeat with right door
assembly (I).
Hardware Used
GG
M4x10 Screw
9. Attach the left door assembly (H) to the cart
body by aligning the holes in the hinge of the left
door assembly (H) with the holes in the cart left
side panel (D). Secure using four M4x10 screws
(DD). Tighten all screws. Repeat with right door
assembly (I).
Hardware Used
DD
M4x10 Screw
7
E
x 4
G
2
8
1
1
J
x 4
9
D
x 8
H
10
1
AA
1
2
GG
K
DD
1
1
D
H