Dynamic Routing - D-Link DIR-100 User Manual

Dynamic Routing

Use the dynamic routing change the mode of the Router and configure RIP settings.
Note: Networks using the DIR-100 as the only router and gateway device and are
not using static routes do not need to change the Dynamic Routing settings.
The Working Mode of the Router determines the primary function of the Router on the LAN. The default
Dynamic Routing settings are suitable for networks that employ a single router for the LAN that also serves
as the gateway router to the WAN. On networks that use multiple routers, it can be advantageous to more
clearly define the functions of the Router.
The Listen Mode setting should be disabled for single router networks. For networks using multiple routers,
this controls how the Router respond to incoming RIP packets. The router will "listen" for incoming RIP1,
RIP2 or or both RIP1 and RIP2 routing information packets.
The Supply Mode defines how the Router transmits RIP informatin to other routers.
DIR-100 Triple Play Router
Dynamic Routing menu
35