Client Filtering - D-Link DIR-100 User Manual

DIR-100 Triple Play Router

Client Filtering

Clients on the LAN side can be filtered by IP address using the Client Filtering menu.
Client Filtering menu
To use IP-based client filtering, click to select the Enable Client Filter box and configure the rules. For each
new fultering rule define the IP adress or address range, each rule allows definition of port, port range and
port type, if no port is defined the rule will block all traffic. Schedules can be created to block at sepecified
times and/or days. Each rule can be enabled or disabled at any time. Click OK to apply and save the new
filtering rules.
32