The Wash Programme Stops And A Fault Indicator Light Comes On - Miele W 3370 Operating Instructions Manual

The wash programme stops and a fault indicator light comes
on.
Problem
The Check drain light
flashes and "– – –"
appears in the
display.
The Check inlet light
flashes and "– – –"
appears in the
display.
The Check inlet and
Check drain lights are
flashing and "– – –"
appears in the
display.
The Soak/Pre-wash or
Rinses indicator light
is flashing and
"– – –" appears in the
display.
A To switch off the fault indicator: Switch the washing machine off with the K
button and turn the programme selector to Finish.
Possible cause
The water outlet is
blocked.
The drain hose has
been fixed too high.
The water inlet is
blocked.
The filter in the water
inlet hose is dirty
The water protection
system has reacted.
There is a fault.
Problem solving guide
Remedy A
Clean the drain filter and the
drain pump as described in
"Problem solving guide –
Opening the drum door in the
event of a blocked water
outlet and/or a power failure".
The maximum delivery head
is 1 m.
Open the stopcock.
Clean the filter.
Call Miele Service.
Start the programme again. If
the fault indicator occurs
again, contact Miele Service.
41