Specifications; General Safety Rules - Makita HP2070F Instruction Manual

SPECIFICATIONS

Model
Speed
Capacities
No load speed (RPM)
Blows per minute
Overall length
Net weight
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.

GENERAL SAFETY RULES

(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
2
High
Concrete 20 mm (3/4")
Steel 8 mm (5/16")
Wood 25 mm (1")
0 - 2,900/min.
0 - 58,000
HP2070/HP2070F
Low
-----
16 mm (5/8")
40 mm (1-9/16")
0 - 1,200/min.
0 - 24,000
364 mm (14-3/8")
2.4 kg (5.3 lbs)
3. Keep bystanders, children, and visitors
away while operating a power tool. Dis-
tractions can cause you to lose control.
Electrical Safety
4. Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it
HP2071/HP2071F
High
20 mm (3/4")
8 mm (5/16") 16 mm (5/8")
25 mm (1") 40 mm (1-9/16")
0 - 2,900/min. 0 - 1,200/min.
0 - 58,000 0 - 24,000
362 mm (14-1/4")
2.4 kg (5.3 lbs)
Low
-----
USA002-2