Switching The Video Output Mode - Roland VS-82H Owner's Manual

Video Operations

Switching the Video Output Mode

This unit provides a variety of output modes for video output. Selecting an output mode recalls preset values for video output.
* You can change "VIDEO OUTPUT" settings after recalling the preset values for video output. Note, however, that depending on the "MODE" setting,
some individual menu items might be unchangeable.
For details, refer to "VIDEO OUTPUT" under "Menu List" in the Reference Manual (PDF).
1.
Select the [MENU] button g "MODE" g the output mode.
In this section, output images are described using A through H for the input video and 1 through
4 for the output video, as shown in the figure at right.
Setting value Description
This outputs the video input channels selected using the
cross-point selection buttons (p. 19).
MATRIX
This combines video pictures into composite output.
MULTI-2 (*1)
The layer positions are fixed and cannot be changed.
MULTI-3 (*1)
MULTI-4 (*1)
This displays a single video picture across multiple screens.
SPAN-2
SPAN-3 (*2)
SPAN-4 (*3)
This outputs the picture rotated 90 degrees
counterclockwise.
ROTATION-L1
ROTATION-L2
ROTATION-L3 (*2)
ROTATION-L4 (*3)
22
Output image
OUTPUT 1 OUTPUT 2 OUTPUT 3
XS-83H and
XS-84H only
INPUT A B C D E F G H
XS-84H
Interlinked buttons
OUTPUT 4 OUTPUT
XS-84H only
1 2 3 4
ü ü
ü ü ü
ü ü ü ü
ü ü ü ü
ü ü ü ü
ü ü ü ü
ü ü ü ü
OUTPUT
1
2
3
4
Button
illumination
pattern