Calculating The Size Of An Area; Using The Calculator; Viewing The Calendar And Almanacs; Logging The Attempt - Garmin eTrex Touch 25 Owner's Manual

2
Select chirp Searching > On.
Finding a Geocache with a chirp
1
Select Geocaching > Find a Geocache.
2
Select a geocache.
3
Select Go.
4
Navigate using the map
compass (Navigating with the Compass, page
When you are within approximately 32.9 ft (10 m) of the
geocache that contains a chirp, details about the chirp
appear.
5
If necessary, select Geocaching > Show chirp Details.
6
If available, select Go to navigate to the next stage of the
geocache.

Logging the Attempt

After you have attempted to find a geocache, you can log your
results. You can verify some geocaches at
www.opencaching.com.
1
Select Geocaching > Log Attempt.
2
Select Found, Did Not Find, or Needs Repair.
3
Select an option:
• To begin navigation to the geocache nearest you, select
Find Next Closest.
• To stop logging, select Done.
• To enter a comment about looking for the cache or about
the cache itself, select Edit Comment, enter a comment,
and select .
• To rate the geocache, select Rate Geocache, and enter a
rating for each category. You can go to
www.opencaching.com
Applications

Sending and Receiving Data Wirelessly

Before you can share data wirelessly, you must be within 10 feet
(3 m) of a compatible device.
Your device can send and receive data when paired with
another compatible device or smartphone using ANT+
technology. You can share waypoints, geocaches, routes, and
tracks.
NOTE: This feature is not available for all device models.
1
Select Share Wirelessly.
2 Select an option:
• Select Send, and select a type of data.
• Select Receive to receive data from another device. The
other compatible device must be attempting to send data.
3
Follow the on-screen instructions.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified range
of a particular location.
1
Select Proximity Alarms > Create Alarm.
2 Select a category.
3
Select a location.
4 Select Use.
5
Enter a radius, and select
When you enter an area with a proximity alarm, the device
sounds a tone.
6
(Navigating with the Map, page
4).
to upload your rating.
.

Calculating the Size of an Area

1
Select Area Calculation > Start.
2
Walk around the perimeter of the area you want to calculate.
3
Select Calculate when finished.

Using the Calculator

4) or
The device has a standard calculator and a scientific calculator.
Select Calculator.

Viewing the Calendar and Almanacs

You can view device activity, such as when a waypoint was
saved, and almanac information for the sun and moon, and
hunting and fishing.
1
Select an option:
• To view device activity for specific days, select Calendar.
• To view the sunrise, sunset, moonrise, and moonset
information, select Sun and Moon.
• To view the predicted best times for hunting and fishing,
select Hunt and Fish.
2
If necessary, select
3
Select a day.

Setting an Alarm

If you are not currently using the device, you can set the device
to turn on at a specific time.
1
Select Alarm Clock.
2 Select and
3
Select Turn Alarm On.
4 Select an option.
The alarm sounds at the selected time. If the device is off at
the alarm time, the device turns on and sounds the alarm.

Starting the Countdown Timer

1
Select Alarm Clock >
2
Select and
3
Select Start Timer.
wireless
®

Opening the Stopwatch

Select Stopwatch.

Satellite Page

The satellite page shows your current location, GPS accuracy,
satellite locations, and signal strength.
Changing the Satellite View
1
Select Satellite.
2
Swipe up from the bottom of the screen, and select
3
Select Track Up to orient the satellite view with your current
track toward the top of the screen.
4
Select Multicolor to assign a specific color to the satellite
and to the signal strength bar of that satellite.
Turning Off GPS
1
Select Satellite.
2
Swipe up from the bottom of the screen, and select
With GPS Off.
Simulating a Location
1
Select Satellite.
2
Swipe up from the bottom of the screen, and select
With GPS Off.
3
Swipe up from the bottom of the screen, and select
Loc. On Map.
or to view a different month.
to set the time.
> Timer.
to set the time.
.
> Use
> Use
> Set
Applications