Pairing The Cameras - Uniden GSHC1000 Series Owner's Manual

Step 6: Pairing the Cameras
App Cam 24
The App Cam 24 is included in the GSHC1000 (Starter
Kit) and the GSHC 3000 (Outdoor/Indoor Kit) and does
NOT come paired to the Gateway.
Connecting to the Gateway
Follow the steps below to pair the App Cam 24 to the
Gateway.
1. First connect the camera to the Wi-Fi router via the Ethernet cable
supplied.
2. Power on the camera using the AC adaptor
supplied and wait until both the LEDs glow
steady.
Note: DO NOT begin the APP setup
process until both LEDs glow steady.
3. Launch the GuardianHome App, select the
Gateway, tap
to add a new camera to the Gateway.
Tap Tap . The App will now search for the . The App will now search for the
camera connected to the Wifi Router and pull
in the camera DID.
4. Tap if search didn't produce any result
and you would like to manually enter DID (15
characters). (DID can be found on the back of
camera).
5. Please name your camera and specify the location where the camera will
be installed. The camera's default security code is '123456'. Tap
complete pairing the camera to the Gateway.
in the 'Status' screen and tap
to
15