Janome MyLock 213 Instruction Manual page 19

Janome ML213 Instruction Manual
11
2
1
a
b
c
www.aaasewing.com
18
!1
b
a
3
11. Move the lower looper to its rightmost position
by turning the handwheel, and draw the thread
with a pair of tweezers through the hole on the
lower looper 10 cm (4˝) or more.
* Make sure the needle thread is not tangled on
the lower looper.
!1
Lower looper
a Needle thread
b Lower
looper thread
Note:How to thread woolly nylon/polyester thread.
* The illustration at left shows one of the easiest
ways to pass woolly nylon/polyester thread
through the lower looper.
* Use the same method with the upper looper.
a Lower looper
b Ordinary thread
c Woolly nylon/polyester thread
Janome My Lock
ML213 Owners Manual/ User Guide