Frost Protection - Salus VS10W Installer's/User's Manual

iT600 VS10W - VS10B Installer - User Manual 022.qxd_Layout 1 07.07.2014 0
User Guide - Frost Protection
Frost protection set
in a Control Group
Thermostat will
also affect group
thermostats unless
they are removed
from the group.
See page 64.
Frost protection is
not available in
cooling. Moving the
to this
position in cooling
will switch the
thermostat to off.
Use the right
arrow to select
the frost mode.
Use the up arrow
to select the

frost protection

temperature.
Press tick to
confirm the
temperature
that has been
set to.
VS10W and VS10B Installer Manual
63