Salus SP120 Instruction Manual

Salus SP120 Instruction Manual

S-series single channel controller

Advertisement

SP120 Manual Ver 005.qxd:Layout 1
S-Series Single Channel Controller
S-Series Single Channel Controller
Model No SP120
Instruction Manual
6/1/11
09:00
Page 1
2

Advertisement

Table of Contents
loading

Summary of Contents for Salus SP120

  • Page 1 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 1 S-Series Single Channel Controller S-Series Single Channel Controller Model No SP120 Instruction Manual...
  • Page 2: Product Compliance

    EC Marking directive 93/68/EEC SAFETY INFORMATION These instructions are applicable to the Salus Controls model stated on the front cover of this manual only, and must not be used with any other make or model. These instructions are intended to apply in the United Kingdom only, and should be followed along with any other statutory obligations - if you are in any doubt, please contact the Salus Controls technical helpline.
  • Page 3 230V AC heating applications. The use of the revolutionary Touch Ring technology makes for simple usage, and is coupled with a unique, smart design and the ‘one touch’ operation makes the SP120 easy to operate. FEATURES •...
  • Page 4: Installation

    The SP120 should be mounted in a location where it will not come into contact with moisture or condensation, as this can affect the Touch Ring operation.
  • Page 5: After Installation

    SP120 will then operate in Normal mode (controller output OFF). If the Reset Button is pressed, the SP120 will behave in the same way as described above, and any previously saved user settings will be deleted and overwritten with the default settings, except when the SP120 is in SERVICE mode.
  • Page 6: User Interface And Controls

    Page 6 USER INTERFACE AND CONTROLS The status and operation of the SP120 can be clearly seen on the large backlit Liquid Crystal Display (LCD) - this display allows the user to see at a glance the current status of the heating system.
  • Page 7 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 7 There are few user controls for the SP120, making the controller very easy to operate. The controls are a Touch Ring (which surrounds the user display), two touch sensitive buttons, a reset button and a slide operated switch mounted on the side of the controller.
  • Page 8: Operation

    Pressing the Arrow key will return the SP120 to NORMAL mode. The controller will also return to NORMAL mode after 10 seconds if no Key is pressed or if no movement is detected on the Touch Ring.
  • Page 9: Boost Menu

    5/2 or 7 day control cycle. The controller has a default set of Programmes that have been designed to meet the needs of most users. If these default programmes are not suitable for your particular situation, reprogramming the SP120 with your own settings is a very straightforward operation.
  • Page 10 Minutes setting is changed in increments of 10 minutes. If you decide to enter settings for individual days rather than Weekdays or Weekends, the SP120 also offers a time saving COPY function that allows the user to copy settings from one day to another.
  • Page 11 Pressing the Arrow key at any time will return the SP120 to the previous screen. Once all the days have been programmed, the SP120 will revert to NORMAL mode. Please be aware that each of the programme time settings must be in sequence: For example, Programme 3 cannot be set with a time earlier than Programme 2.
  • Page 12: Mode Selection

    Page 12 MODE SELECTION The SP120 operating mode is selected with the controller in NORMAL mode by touching the Touch Ring (but not the ARROW or OK keys). There are four operating modes for the controller: ON, ONCE, AUTO and OFF Each mode can be selected when the controller is in NORMAL mode by scrolling the Touch Ring in a CLOCKWISE direction.
  • Page 13: Holiday Menu

    Page 13 HOLIDAY MENU Entering the HOLIDAY menu allows you to turn on the holiday override mode of the SP120. The HOLIDAY mode allows the user to override all the current Programme settings and turn off the heating system between two dates entered by the user.
  • Page 14 OK will display CANCEL HOLIDAY alternately as shown below: Pressing the OK key again will cancel HOLIDAY mode and return the SP120 to AUTO mode. Pressing the Arrow key leaves the controller in HOLIDAY mode. SP120 INSTRUCTION MANUAL...
  • Page 15 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 15 TIME MENU If the time and date setting need to be set manually, this can be done by accessing the TIME menu. The first option within the menu is a choice of 12 or 24 hour clock setting.
  • Page 16: Service Menu

    SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 16 After completing the setting of the date, the last operation is to turn Daylight Saving on or off. By default, Daylight Saving is ON. Use the Touch Ring to scroll to the...
  • Page 17 SERVICE mode on or off. The default service code is set to 000. If you forget the code, then you will need to contact Salus Controls technical support. Once the code has been entered, the next menu screen allows you to set the next service date for the system. Set the date in the order day, month and year: Confirm the setting using the OK key, or press the Arrow key to return to the previous screen display.
  • Page 18 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 18 Repeat this action until you have entered the entire telephone number. After entering and confirming the last digit with the OK key, store the telephone number by pressing the OK key.
  • Page 19 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 19 At seven days before the set date, the SERVICE indicator will flash: SP120 INSTRUCTION MANUAL...
  • Page 20 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 20 Once the set date has been reached, SERVICE indicator will continue to flash and the display will change to indicate that the service is now due: Once the service is due, all output from the controller is turned OFF, regardless of any other programme settings.
  • Page 21: Radio Controlled Clock

    Reset Button is pressed. If for any reason the SP120 fails to automatically update the time setting, then the data stored in the internal memory will be used. The clock settings can also be changed manually if required – manual settings will be overwritten at the next successful automatic update.
  • Page 22: Daylight Saving

    RESET BUTTON The Reset Button is provided as a way to restore the heating controller to its default factory settings. Pressing this button will delete any previously entered settings, except when the SP120 is in SERVICE mode. The default factory settings for the SP120 are:...
  • Page 23: Maintenance

    09:01 Page 23 AC MONITORING The SP120 monitors the presence of mains power. If the mains supply is not detected, all settings are saved to the internal memory and all controller functions are paused. The controller output will also be turned off.
  • Page 24: Product Specification

    SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:01 Page 24 PRODUCT SPECIFICATION Model: SP120 Type: Single channel programmable heating controller designed for volt free and 230V AC heating applications. CLOCK Type: Radio Controlled (RCC). Reception Frequency: 60 kHz ± 300 Hz Display Modes: 12 or 24 hour clock with Day of Week display.
  • Page 25 Salus Controls sole liability for breach of this warranty will be (at its option) to repair or replace the defective product.
  • Page 26 SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:01 Page 26 salus-tech. Email: sales@salus-tech.com Tel: 01226 323961 Sales Email: tech@salus-tech.com Tel: 01226 323961 Technical Salus Controls plc, Salus House, Dodworth Business Park South, Whinby Road, Dodworth, Barnsley S75 3SP...

Table of Contents