System Parameters - Salus VS10W Installer's/User's Manual

iT600 VS10W - VS10B Installer - User Manual 022.qxd_Layout 1 07.07.2014 0
Installation – System Parameters
You are now ready to configure the unit
using the system parameter table below.
SX FUNCTION
SO1 System Unit
Type
S03 System
Communication
*S03 setting 1 is used for Control Group options 2 & 3 see pages 33-36, communication
connection must be used, global heat/cool changeover is also included if applicable to your system.
**S03 setting 0 is used for option 1 (see page 31) when heat/cool changeover is required for individual
PRT' s , communication connections must be used for this function. S03 setting 0 is only available if setting
0 has been selected for S01. If no heat/cool changeover is required when using PRT's only then select
setting 2 for S03
28
VS10W and VS10B Installer Manual
SYSTEM SETTING
0 Programmable Stat (PRT)
1 Digital Thermostat
2
0** PRT only with communication*
1* Group control thermostat and
group thermostat communication
2 No Communication /
Grouping required
DEFINITION DEFAULT
HW Timer
0
1