Table of Contents

Advertisement

Available languages

Available languages

11.10
PORCELAIN WRAP
Remove the two screws on either
A.
top side of the porcelain wrap.
Tip the wrap forwards and lift out.
B.
11.11

DOOR LATCH REPLACEMENT

Remove Media Tray, see "BURNER REMOVAL" section.
A.
NOTE: For One Side appliance, the porcelain wrap must be removed prior to media tray.
Remove the porcelain side panels by lifting them from the bottom and sliding them out from the tabs
B.
as illustrated.
Remove the 4 bolts and replace the latch assembly. Adjust the tension of the latches to ensure proper
C.
door seal.
NOTE: Be careful not to tear the latch assembly gasket. Replacement gaskets can be ordered
from your local authorized dealer / distributor.
Reinstall the porcelain side panels, the porcelain wrap (if applicable) and the media tray.
D.
1
PORCELAIN
SIDE PANELS
SCREWS
2
TABS
3
BOLTS
LATCH
ASSEMBLY
57
EN
W415-0745 / F / 08.26.13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lhd50pLhd50n2Lhd50p2

Table of Contents