Uconnect® Voice Commands - Dodge 2015 Dart Owner's Manual

At any point, if the system does not recognize one of your
commands, you will be prompted to repeat it.
To hear available commands, push the Uconnect® Voice
Command button and say "Help." You will hear
available commands for the screen displayed.
Uconnect® Voice Commands
The Uconnect® Voice Command system understands
two types of commands. Universal commands are avail-
able at all times. Local commands are available if the
supported radio mode is active.
Start a dialogue by pushing the Uconnect® Voice Com-
mand button.
Changing The Volume
1. Start a dialogue by pushing the Voice Command
button.
2. Say a command (e.g., "Help").
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Com-
mand system is speaking. Please note the volume
setting for Voice Command is different than the audio
system.
Starting Voice Recognition (VR) Session In
Radio/Player Modes
In this mode, you can say the following commands:
NOTE: The commands can be said on any screen when
a call is not active after pushing the Uconnect® Voice
Command button.
Source
To switch to the audio source, say "Change source to
Disc" for example. This command can be given in any
mode or screen:
• "Track" (#) (to change the track)
I n f o r ma t i o n P r o v i d e d b y :
3