Polycom SoundPoint IP 560 User Manual page 33

Hide thumbs Also See for SoundPoint IP 560:

Table of Contents

Note

Incoming calls may be ignored by pressing the Reject soft key (for private lines) or

Do Not Disturb during ringing. The Do Not Disturb mode stays active when the

call is dropped and will remain so until toggled off.

When your SoundPoint IP 560 phone is configured for silent ring, press the

ringing Line key or the Answer soft key and you will answer the call. If your

handset is off-hook, the call is routed to the handset. If your handset is on-

hook, the call is routed to the speaker.

Answering When Not in Another Call

In all cases, the active call will appear on the graphic display showing call

duration and destination.

To answer a call using the handset:

Pick up the handset.

To answer a call using Hands-Free Speakerphone mode:

Note

If "Handsfree mode disabled" appears on the graphic display after you press the

speakerphone key

your phone.

Do one of the following steps:

— Press

— With the handset on-hook, press opposite the incoming call (where the

line status indicator is flashing green).

— With the handset on-hook, press

incoming call (where the line status indicator is flashing green)

— Press the Answer soft key.

Using the Basic Features of Your SoundPoint IP® 560 Phone

your system administrator has disabled the speakerphone on

opposite the

3 - 5

Table of Contents