Installation; Location - Kenwood KDW45X10 Instruction Manual

installation

location

When selecting a position for your
freestanding dishwasher you should make
sure the installation surface is flat and
firm, and the room is well ventilated. Avoid
locating your dishwasher near a heat source,
eg. cooker, boiler or radiator. Extreme cold
ambient temperatures may also cause the
appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
Do not drape the dishwasher with any
covering. When installing, ensure that free
space is left at the sides.
All parts removed must be saved to
do the reinstallation in the future.
Ensure the dishwasher is unplugged
and empty. We recommend that 2
people handle the dishwasher during
installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling is
essential for correct closure and sealing
of the door. When the unit is correctly
levelled, the door should not catch the
inner liner on either side of the cabinet.
The adjustable feet may be loosened or
tightened in order to obtain the optimum
levelling of the unit.
KDW45X10_IB_final110323.indd 5
850 620 600
30
450
850
450
unit in mm
level
level
level
level
5
23/03/2011 3:16 PM