D-Link DES-1210-28 User Manual page 4

1 Product Introduction
Reset: By pressing the Reset button the Switch will change back to the default configuration and all changes
will be lost.
Rear Panel
Power: The power port is where to connect the AC power cord.
DES-1210-28P
24-Port 10/100Mpbs PoE with 4-Port 10/100/1000Mbps Copper and 2 Combo SFP Web Smart Switch
Front Panel
Power LED : The Power LED lights up when the Switch is connected to a power source.
Power Max LED: The Power Max lights up when the system power resource remain ≦7W, in the meantime,
system will not provide power to the additional PoE PD inserted.
Fan OK/Fail LED: The FAN LED shows the status of the fans, the green light (OK) indicates that all fans work
fine and the red light (Fail) indicate that on or multiple fans are working abnormally.
NOTE: On DES-1210-28, the MiniGBIC ports are
shared with normal RJ-45 ports 25 and 26. When
MiniGBIC port is used, the RJ-45 port cannot be
used.
CAUTION: The MiniGBIC ports should use UL
listed Optical Transceiver product, Rated Laser
Class I. 3.3Vdc.
Figure 4 – DES-1210-28 Rear Panel
Figure 5 – DES-1210-28P Front Panel
5
D-Link Web Smart Switch User Manual