Port Mirroring Commands - D-Link DES-2110 User Manual

Example usage:
To configure the 802.1Q Port VLAN_ID:

Port Mirroring Commands

The port mirroring commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
config mirror port
show mirror
VLAN ID to the specified ports.
priority <0~7> - To configure the priority to the
specified PVID.
Figure 74. config pvid command
Parameters
[enable | disable] {<port>
ports <portlist> [rx | tx |both]}
show mirror
79
source