Table of Contents
Advertisement
Chapter 5: Windows 7 Installation
Chapter 5: Windows 7 Installation
Note: The installation procedure for 32- and 64-bit versions of Windows 7 is virtually
identical.
1. Power-up your Windows computer, and log in as an Administrator—either with the
"Administrator" account or any other account with administrative privileges. Otherwise,
you will not be able to install the G-Node software.
Caution!
DO NOT connect the Gibson
G-Node to your computer's USB 2.0 port yet.
2. If a previous G-Node Control Panel installation exists, uninstall the program as described
in Appendix C.
3. Make sure there is at least 50MB of free disk space on your main system C: drive.
4. Download the latest G-Node software for Windows as described at the beginning of
Chapter 3, and save it to your desktop. If the file has a .ZIP suffix, double-click on it to
extract the FBX_Setup.exe installation file; this will appear on your desktop.
5. Double-click on the FBX_Setup.exe icon.
6. If User Account Control is enabled, you'll be asked if you want the program to make
changes to your computer. Click on Yes.
7. When the Installation Options screen appears, verify that all three check boxes are
checked. Click on Next.
8. The Installation Folder window appears. This notifies you of the space required on your
hard drive for installation, and the available space. You also have the option to change
Page 15
Advertisement
Table of Contents
