Table of Contents
Advertisement
Chapter 4: Macintosh Installation
Chapter 4: Macintosh Installation
1. If a previous G-Node Control Panel installation exists, uninstall the program as described
in Appendix B.
2. Check that there's at least 130MB of free disk space on your main system drive.
3. Download the latest G-Node software for Mac as described at the beginning of Chapter 3,
and save it to your desktop. If the file has a .ZIP suffix, double-click on it to extract the
Firebird.pkg installation file. This will appear on your desktop.
4. Plug the smaller connector of the included USB 2.0 high-speed cable into the USB 2.0
port on the G-Node's rear panel, and the larger connector into an available USB 2.0 port on
your Mac (there's usually one on the Mac's front panel; otherwise, check the rear panel).
5. Double-click on the Firebird.pkg file. The installation window appears. Click on
Continue.
6. The Standard Install window appears. This notifies you of the free space required on your
hard drive for installation, and gives the option to change installation to a drive other than
your main system drive. Gibson strongly recommends using the default installation path.
Click on Install.
Page 12
Advertisement
Table of Contents
