Using Your Telephone; Change The Default Password; Making A Call - Alcatel-Lucent OmniTouch 8082 My IC User Manual

2 Using your telephone

2.1 Change the default password

To access all your phone's features you need to replace the default password with a new password.

Use one of the following:
Press the User services key.
o
Press your information area in the top left corner of the screen
o

Login

Enter the default password (151515).

Enter the new password.
Your password has 6 digits.
A weak personal code with 6 identical digits (000000, 111111, etc.) or a simple sequence of 6
digits (012345, 123456, etc.) will be rejected by the system.

Confirm the new password.

Ok
After a system upgrade, the password may still have only 4 digits. For security reasons, we
recommend you use a password with 6 digits. Contact your installer for more information.

2.2 Making a call


Use one of the following:
o Dial directly the number for your call.
o Lift the receiver Enter the destination number.
Press the on-hook/off-hook key of the Bluetooth® device ( Bluetooth® Wireless
o
handset) Dial the destination number.
Dialer
o
Hands free Dial the destination number.
o
o Programmed line key.
Search by name (you can also access the search by name feature via the
o
alphapad).

Call
To make an external call, dial the outside line access code before dialing your contact number. The
default outside-line access code is usually 0. However, please check this code with your installer.
The picture of your correspondent can appear on the phone only if a picture was initially copied in the
set memory and associated to your contact (See: Define a contact).
16
User Information