Swann QW48 Quick Start Manual page 6

5
Configure Daylight Saving Time (DST)
You can configure your DVR to automatically adjust its time for Daylight Savings in your time
zone. You can set when daylight saving time starts and ends, for example - 2 a.m. on the first
Sunday of a particular month. Enable the Enable DST checkbox and adjust accordingly. If
Daylight Savings is not observed in your region, leave the Enable DST checkbox unchecked.
The Enable NTP option is checked by default. It's the best way for your DVR to automatically
update and maintain accurate time by syncing its clock with an Internet Time Service.
Click Next to continue.
5