Table of Contents
Advertisement
Quick Links
DVR Quick Start Guide
EN
Welcome! Lets get started.
• Getting to know your DVR
• What does this mean?
• Connect your Cameras
• Connect the DVR to your Home Network
• Connect the Mouse
• Connect the DVR to your HDTV
• Connect the DVR to your Monitor (optional)
• Connect the Power Adapter
QH16_3250040215E | © Swann 2015
1
Advertisement
Table of Contents
Related Manuals for Swann QH16
Summary of Contents for Swann QH16
- Page 1 • Connect your Cameras • Connect the DVR to your Home Network • Connect the Mouse • Connect the DVR to your HDTV • Connect the DVR to your Monitor (optional) • Connect the Power Adapter QH16_3250040215E | © Swann 2015...
-
Page 2: Getting To Know Your Dvr
Getting to know your DVR Congratulations on the purchase of your Swann DVR. This quick start guide will assist you on getting your DVR up and running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping. -
Page 3: What Does This Mean
What does this mean? 10) IR Receiver Here are explanations for the various connections and - Receives a signal from a remote control lights on the DVR - (not supplied). 1) Power 11) HDD LED - This is where you connect the power adapter. - This will flash when the hard drive is working. -
Page 4: Connect Your Cameras
Connect your Cameras Then connect the provided power splitter to the other end of the video & power cable. Power Splitter Video Output Video & Power Cable Power Adapter Connect the video output and DC Power DC power connection on the camera to the corresponding connections on the video &... - Page 5 Connect the DVR to your Home Network Connect the Ethernet cable (supplied) to the LAN connection on the DVR, and then connect the other end to a spare port on your router or wireless access point. AUDIO AUDIO DC 12V HDMI VIDEO IN It’s important that you do this as this allows you to access the DVR from your smartphone or tablet and to send...
-
Page 6: Connect The Mouse
Connect the Mouse Connect the mouse (supplied) to one of the USB ports located at the back of the DVR. You can connect a flash drive (not supplied) to the other USB port to back up your video recordings and to perform a firmware update when available. AUDIO AUDIO DC 12V... - Page 7 Connect the DVR to your HDTV Connect the HDMI cable (supplied) to the HDMI input on the DVR, and connect the other end to a spare HDMI input on your HDTV. Make sure your HDTV input matches the physical connection used to connect the DVR. HDMI IN 2 HDMI IN 1 AUDIO...
- Page 8 Connect the DVR to your Monitor (optional) 5 If you have a Monitor with a VGA connection, connect a VGA cable (not supplied) to the VGA output on the DVR, and connect the other end to the VGA input on your Monitor. AUDIO AUDIO DC 12V...
-
Page 9: Connect The Power Adapter
Connect the Power Adapter Connect the power adapter (supplied) to the power input on the DVR. There will be a label on the power adapter indicating that it is for the DVR and not the cameras. Connect the power adapter to a spare wall socket. AUDIO AUDIO DC 12V...