Using The External Navigation Unit - Kenwood DDX6023BT Instruction Manual

Using the external navigation unit

You can connect a navigation unit (KNA-G620T : optional accessory) to the navigation input
terminal so that you can view the navigation screen. (☞ page 76)
The navigation guidance comes out of the front speakers even when you listen to an audio
source.
Preparation: Select <NAV> for <NAV IF Input> while [STANDBY] is selected on <Top
Menu> so that <NAV> is selectable as the source on <Top Menu> (☞ page 46).
To view the navigation
screen
On <Top Menu>:
On any screen:
The navigation screen is activated.
• While the navigation screen is displayed,
the touch panel operations are available
only for using navigation function.
• The aspect ratio of the navigation screen
is fixed to <FULL> regardless of the
<Aspect> setting (☞ page 42).
To cancel the navigation screen
DDX4023BT/
DDX4053BT/
DDX6023BT/ DDX3023/
DDX3053
DDX6053BT
Settings for navigation unit
1
On <Top Menu>:
36
English
or
DDX42BT/
DDX35
2
3
Guidance Select front speakers
used for the navigation
guidance.
Volume Adjust the volume of the
navigation guidance. (0
to 35)
NAV Mute Select [ON] to attenuate
the sound coming out
of speakers other than
the front speakers during
navigation guidance.
NAV Setup Press [Enter] to display
the setup screen for
the navigation unit.
See the instruction
manual supplied for the
navigation unit.