Using Other External Components; Av-In - Kenwood DDX6023BT Instruction Manual

Using other external components

AV-IN

To display the source control screen, ☞ page 14.
☞
AV-IN name ( below)
[MODE] Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
• This setting does not affect the source name "AV-IN 1"/ "AV-IN 2"
displayed on <Top Menu>.
[MENU] Displays the <Top Menu> screen.
You can connects external components to the AV-IN1 and iPod/AV-IN2 input terminals.
Preparation:
If you want to use "AV-IN2", select [AV-IN2] for <AV Input> setting. (☞page 46)
• No preparation is required for "AV-IN1".
1
Connect external components
to AV-IN1 and iPod/AV-IN2
input terminals.
To connect external components,
☞ pages 75 and 76.
2
Select "AV-IN 1" or "AV-IN 2" as
the source.
(☞ page 14)
☞
page 36
3
Turn on the connected
component and start playing
the source.
35
English