Brake Pad Replacement - Yamaha YW50AP Service Manual

2
2
3
1
1
a
6-9
FRONT BRAKE
cC
Disc brake components rarely require disas-
sembly. DO NOT:
8 Disassembly components unless absolutely
necessary.
8 Use solvents in internal brake component.
8 Use contaminated brake fluid for cleaning.
8 Use only clean fluid.
8 Allow brake fluid to come in contact with
the eyes otherwise eye injury may occur.
8 Allow brake fluid to contact painted surfaces
or plastic parts otherwise damage may oc-
cur.
8 Disconnect any hydraulic connection other-
wise the entire system must be disas-
sembled, drained, cleaned, and then prop-
erly filled and bled after reassembly.

BRAKE PAD REPLACEMENT

NOTE:
It is not necessary to disassemble the brake
caliper and brake hose to replace the brake
pads.
1. Loosen:
8 Retaining bolt 1
2. Remove:
8 Brake caliper 2
8 Holder (brake hose) 3
3. Remove:
8 Retaining bolt
8 Pads 1
8 Pad spring 2
NOTE:
8 Replace the pad spring if the pad replacement
is required.
8 Replace the pads as a set if either is found to
be worn to the wear limit.
Wear limit a:
0.8 mm (0.03 in)
CHAS