Front Wheel Installation - Yamaha YW50AP Service Manual

1
FRONT WHEEL AND BRAKE DISC
1
1
6-5
2. Install:
8 Brake disc 1
NOTE:
Tighten the bolts (brake disc) in stage using a
crisscross pattern.
EB700030

FRONT WHEEL INSTALLATION

Reverse the "REMOVAL" procedure.
Note the following points.
1. Lubricate:
8 Front wheel axle
8 Bearings
8 Oil seal (lips)
8 Drive/driven gear (speedometer)
Recommended lubricant:
Lithium soap base grease
2. Install:
8 Speedometer gear unit 1
NOTE:
Make sure that the wheel hub and the speed-
ometer gear unit are installed with the three
projections meshed into the two slots.
3. Install:
8 Front wheel
NOTE:
Make sure that the slot in the speedometer gear
unit fits over the stopper on the front fork outer
tube.
4. Tighten:
8 Front wheel axle 1
8 Axle nut (front wheel axle)
cC
Before tightening the axle nut, stroke the front
fork several times to check for proper fork op-
eration.
w
Make sure that the brake hose is routed prop-
erly.
CHAS
20 Nm(2.0 m.kg, 14 ft.lb)
70 Nm(7.0 m.kg, 51 ft.lb)