Installing The Lom Riser Card - Dell PowerEdge FC430 Owner's Manual

Figure 15. Removing and installing the LOM riser card
1. LOM riser card
3. standoff (2)
Next steps
1. Install the LOM riser card.
2. Follow the procedure listed in
Related Links

Installing the LOM riser card

Installing the LOM riser card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the LOM riser card to replace a faulty LOM riser card or service other
components inside the system.
1. Ensure that you read the
2. Follow the procedure listed in
3. Keep the Phillips #2 screwdriver ready.
58
After working inside your
Safety instructions.
Before working inside your
2. screw (2)
4. connector on the system board
system.
system.