Table of Contents
Advertisement
2
2
Analog audio cables
Use stereo RCA phono cables to connect analog audio
components. These cables are typically red and white, and
you should connect the red plugs to R (right) terminals and
white plugs to L (left) terminals.
White (Left)
L
A U D
R
Red (Right)
Digital audio cables
Commercially available coaxial digital audio cables or optical
cables should be used to connect digital components to this
receiver.
C O A
X I A
Coaxial digital
L
I N
audio cable
O P T
Optical cable
Note
•
When connecting optical cables, be careful when inserting
the plug not to damage the shutter protecting the optical
socket.
•
When storing optical cable, coil loosely. The cable may be
damaged if bent around sharp corners.
•
You can also use a standard RCA video cable for coaxial
digital connections.
Standard RCA video cables
These cables are the most common type of video connection
and are used to connect to the composite video terminals. The
yellow plugs distinguish them from cables for audio.
I O
I C A
L
I N
About video outputs connection
This receiver is not loaded with a video converter. When you
use HDMI cables for connecting to the input device, the same
cables should be used for connecting to the TV.
The signals input from the analog (composite) video inputs of
this unit will not be output from the HDMI OUT.
V I D
E O
Yellow
13
Connecting your equipment
Playback component
IN
IN
Terminal for connection
with source device
HDMI
VIDEO
MONITOR
OUT
OUT
Terminal for connection
with TV monitor
HDMI
VIDEO
The OSD will
not appear.
TV
Video signals can be output.
4
6
33
Hide quick links:
Advertisement
Table of Contents
