Bosch NIT5066UC Use And Care Manual page 15

Length of timer end signal
™‡
10 seconds*
‚
30 seconds
ƒ
1 minute
„
™ˆ Power Management function
= Off*
‹
= 1.000 W. minimum power
‚
.= 1.500 W
‚
= 2.000 W
ƒ
etc.
or
Š
Selection time for heating element
™Š
Unlimited*: You can adjust the settings of the last heating element used at any time without hav-
‹
ing to select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
‚
selecting it. After that you will have to reselect the heating element before setting it.
Reset to basic settings
™‹
Off*
‹
‚ Reset the appliance to basic settings
*factory settings
Changing the basic settings
The cooktop must be turned off.
Turn on the cooktop with the main switch.
1.
Within the next 10 seconds, touch Panel Lock for
2.
about 4 seconds.
and blink alternatingly in the element display and
™ ‚
lights up on the timer display.
‹
Touch Panel Lock repeatedly until the indicator for the
3.
desired function appears in the element display.
. = maximum power of the element
Š
Use the and keys until the desired setting
@ A
4.
appears in the timer display.
Touch Panel Lock again for 4 seconds. The setting is
5.
stored.
Quit basic settings
Turn the cooktop off with the main switch.
15