Recording One Channel/Watching Another 31
1
Press REC to start recording the current channel.
See page 24.
2
Press VCR/TV to put the VCR in TV position. The
VCR/TV light will disappear.
3
Use the TV remote control to select the channel you
want to watch at the TV.
4
To return to the channel being recorded, use the TV
remote control to select channel 3 or 4, whichever
channel the RF output channel of the VCR is set to.
Choose the channel it was on before you changed it at step 3.
5
Press VCR/TV on the VCR's remote to put the VCR
back in VCR position. The green VCR/TV light will reappear.
The channel being recorded will appear on the screen.
6
To stop recording, press STOP .
3
Select the channel you
want to watch at the TV.
4
Set the TV to channel
3 or 4.
2,5
POWER
VCR/TV
EJECT
PLAY
REW
F.FWD
STOP
STATUS
1
2
3
4
5
6
7
8
9
0
SPEED
SEARCH MODE STILL/PAUSE
1
REC
MEMORY
SLOW
Helpful Hint
• If you use a Cable Box/Satellite,
you may not be able to watch
one channel while recording
another. See pages eight-nine.
6
CH