Elation PLATINUM SPOT 35 PRO User Manual page 12

Table of Contents

Advertisement

LAMP SAFETY INSTRUCTIONS
ALWAYS replace lamp every 750 Hours.
Use only Genuine Original Phillips™ Platinum 35 lamps!
Other brand lamps may cause damage and void the warranty!
NEVER touch the lamp with your bare hands!
Oil from your hands will shorten the life of the lamp.
Always disconnect the fixture's main power supply before replacing lamp.
Allow fixture to cool for at least 15 minutes before attempting any type of service.
Make sure ALL covers/panels are replaced/secured before operating the fixture
to prevent any risk and/or damage to eye retina from UV Radiation exposure!
LAMP INSTALLATION PROCEDURE
1. Place the fixture on a flat surface, turn the center screw on the rear cover plate
counterclockwise and pull panel door down to access the lamp.
 
w w w . e l a t i o n l i g h t i n g . c o m
         
12
PLATINUM SPOT 35 PRO™ User Manual Version 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents