Vcp Functions; Selecting The Menu Language For Vcp; Playback; Index Search - Magnavox MBP110V/F7 Owner's Manual

Make sure your TV's input is set to the correct video channel. (Refer to page 14.)

Selecting the Menu Language for VCP

1
Press [TAPE] first.
2
Press [SETUP].
• The "LANGUAGE SELECT" menu appears.
LANGUAGE SELECT
ENGLISH
FRANCAIS
ESPAÑOL
3
Use [K / L] to select "ENGLISH", "FRANCAIS"
or "ESPAÑOL", then press [SETUP] to exit.

Playback

1
Press [TAPE] first.
2
Insert a pre-recorded cassette tape into the
cassette compartment of this unit. The unit
will start playback automatically.
To stop playback:
Press [C (stop)].
To return to the normal playback:
Press [B (play)].
3
Press [OPEN/CLOSE EJECT A] to eject the
cassette tape.
Note
• Tracking will be automatically adjusted during
playback. To adjust the tracking manually, press
[TRACKING –/ +]
.
• If a cassette tape is inserted when the unit's power is
in the standby mode, the playback will not start
automatically. Press [B (play)] to start playback in
this case.
• Playback will stop when you change the output
mode.
EN

VCP FUNCTIONS

[ON]

Index Search

An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
1
Press [TAPE] first.
2
Press [SEARCH] repeatedly until "INDEX
SEARCH" screen appears.
3
Use [K / L] to select the index mark number
you like to skip to.
INDEX SEARCH
03
4
Press [B] to skip forward.
Press [s] to skip backward.
The playback will start automatically from the selected
index mark point.
Current program
Beginning
of tape
Pgrm.1 Pgrm.2 Pgrm.3 Pgrm.4 Pgrm.5
02 01 01
Note
• This unit does not have recording function, so you
must record a tape from another VHS tape recorder.
• The time gap between index marks should be
greater than 1 minute for SP mode, 2 minutes for LP
mode and 3 minutes for SLP mode.
End
of tape
02 03
Index mark
39
EN