Tire Pressure; Changing A Flat Tire; Securing The Fuel Cap; Resetting The Oil Life System - Chevrolet 2007 HHR Getting To Know Manual

Tire Pressure

The Tire and Loading Information label
lists the proper size, speed rating and
recommended tire inflation pressure for
the tires on your vehicle. This label is
located on the driver's doorjamb.
Overinflated and underinflated tires
affect fuel economy and vehicle handling
as well as promote tire wear.
See Section 5 of your Owner Manual.

Changing a Flat Tire

The spare tire and jack are located in
the spare tire well, under the cargo area
load floor.
Position the jack at the proper lift points
under the vehicle before attempting to
jack it up. It's important to follow all the
guidelines in your Owner Manual to
safely and properly change a tire.
See Section 5 of your Owner Manual.

Securing the Fuel Cap

If the Check Gas Cap message is dis-
played on the Driver Information Center
when the engine is running, check that
your fuel cap is securely fastened. If the
cap is not secure, turn it clockwise until
a clicking sound is heard, indicating that
it is properly installed.
The Check Gas Cap message will turn
off after a few driving trips with the cap
properly installed.
See Section 3 of your Owner Manual.

Resetting the Oil Life System

The Oil Life System calculates engine oil
life based on vehicle use and displays
CHANGE OIL SOON in the Driver
Information Center (DIC) when it's nec-
essary to change your engine oil and fil-
ter. The Oil Life System should be reset
to 100% only following an oil change.
To Reset the Oil Life System:
1. Turn on the ignition.
2. Press and hold the
button and the
the same time to enter the personal-
ization menu.
3. OIL LIFE RESET will be displayed.
4. Press and hold the
at least one second. An ACKNOWL-
EDGED message will appear when
the system has been reset.
5. Turn off the ignition.
See Section 5 of your Owner Manual.

Cleaning the Interior Upholstery

In general, cleaning the entire seat
panel is recommended, starting from the
seams and moving into the stain to
avoid a ring effect after drying.
For the cloth fabric seats, in most
instances, soda water and a clean white
cloth will remove spills and spots. For oil
and grease spots, sprinkle baking soda
on the spot, and then brush and wipe
with a clean white cloth. See your
Owner Manual for additional cleaning
information.
See Section 5 of your Owner Manual.
19
(Information)
(Reset) button at
button for