Table of Contents
Advertisement
information from these stations and
will only work when the information is
available.
With RDS, the radio can:
• Seek stations broadcasting the
type of programming you select
• Receive announcements concerning
local and national emergencies
• Display messages from radio
stations, and
• Seek stations with traffic
announcements
When you tune to an RDS station, the
station name and call letters will appear
on the display instead of the frequency.
RDS stations may also provide the time
of day, a program type (PTY) for current
programming and the name of the pro-
gram being broadcast.
RDS Messages
When using RDS, the following mes-
sages may appear on your vehicle's
audio system display:
ALERT: Alert warns of local or national
emergencies. You will hear the
announcement, even if the volume is
muted or a CD is playing. You will not be
able to turn off alert announcements.
INFO (Information): If the current station
has a message, press this button to
view the message.
TRAF (Traffic): Press this button to
receive traffic announcements. TRAF
will appear on the display and when a
traffic announcement comes on you will
hear it.
See Section 3 of your Owner Manual.
XM Satellite Radio
On equipped radios, two additional lis-
tening bands are available: XM1 and
XM2. To access these bands, press the
BAND button until XM1 or XM2 appears
on the display.
XM Satellite Radio is 100 channels of
digital quality sound that goes wherever
you go — coast to coast. XM displays
song title, artist and entertainment
genre.
Activation fee and service subscription
are extra. Available only in the U.S. 48
contiguous states.
For more information, contact XM on the
Internet at www.XMradio.com or call
1-800-852-XMXM (9696).
See Section 3 of your Owner Manual.
Multiple Disc CD Changer
The multiple-play CD changer on
equipped vehicles operates differently
than the single-CD players found in GM
vehicles.
TO LOAD ONE DISC:
1. Press and release the LOAD button
and wait for the red light to the right
of the CD holder to turn green.
2. When the light turns green, load the
CD. When the CD is loaded and the
power is on, the CD will begin to play
automatically.
5
Advertisement
Table of Contents
