Playing A Disc 19 - Magnavox MDV430 Owner's Manual

MDV410/430 2/7/02 11:18 AM Page 19
DVD AUDIO CD
Before you begin, turn on the power of the TV, stereo, and
any other equipment connected to the DVD Player. Make
sure the TV and the stereo (if applicable) are set to the cor-
rect channel. Details are on pages 8-13.
1 Press POWER to turn on the DVD Player.
P-ON will appear briefly on the display panel of the
MDV430. The red POWER light will appear on the
front of the MDV410 when the power is on.
2 Press OPEN/CLOSE A to open the Disc tray.
Place a Disc into the tray. Make sure the Disc is
3
sitting properly in the recessed groove of the tray.
Some DVDs are recorded on both sides. Make sure
the side you want to play is facing up. Or, if the DVD
is recorded on only one side, place the Disc in the
tray with the label facing up (shiny side facing down).
4 Press OPEN/CLOSE A to close the tray. Disc
playback may start automatically. Or, if the DVD has
a menu, the menu may appear on the screen instead.
Details are on page 20.
With some Audio CDs, playback will not begin until
you press Play B.
To search forward or backward during playback, see
page 22.
Press Stop C to stop playback.
5
Remember, this DVD Player
will play only certain Discs.
See page six for details.

Playing a Disc 19

2,4
OPEN/
POWER REPEAT A-B
1
CLOSE
DISPLAY SKIP PAUSE
5
AUDIO
1 2 3
SUBTITLE
4 5 6
ANGLE
7 8 9
SEARCH
CLEAR
MODE
0 + 10
MENU TITLE MODE
ZOOM
OK
SETUP RETURN MARKER
Helpful Hints
• An "X" may appear in the top
right corner of the TV screen
when you try a feature. This
means either the feature you tried
is not available on the Disc, or the
DVD Player can not access the
feature at this time. This does not
indicate a problem with the DVD
Player.
• If a Disc is dirty or has scratches,
the pictures may appear distorted
and playback may stop. In such
cases, remove the Disc and turn
off the DVD Player. Unplug the
power cord, then reconnect it to
the power outlet. Clean the Disc,
then turn on the DVD Player
again and reinsert the Disc for
playback.
• If a Disc has multiple layers, the
picture may freeze occasionally.
This happens when the first layer
switches to the second layer. This
is not a malfunction.