Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 102

Menu bar
............................................................................................................................................................................................................................................................
Site ID - The site identifier.
•
Date - This shows the current date in the <year>-<month>-<day> format.
•
Time - This shows the current time in the <hour>-<minute>-<second> format.
•
NE Type - This shows the type of NE.
•
NE software release number - This shows the NE software release number.
•
Figure 3-34 NE discovery - Site header 2
DCC channel
The DCC menu option has the following two sub-menus:
Network IF - Allows the operator to modify the various network interface parameters
•
on a specified DCC channel on an optical port for data communication purposes.
OSI ULC - Allows to modify OSI upper layers stack parameters that are common to
•
all the stack interfaces of the NE.
XC Overhead - Allows to modify the cross-connection overhead parameters on
•
specified DCC channel on an optical port for data communication purpose.
Network IF
It allows the operator to modify the various network interface parameters on a specified
DCC channel on an optical port for data communication purposes. The network interface
must be first provisioned on the line or section DCC of the specific STSn facility. The
DCC is identified as STSn and the DCCCHNL parameter.
Select the Xcom -> DCC -> Network IF option as shown in
............................................................................................................................................................................................................................................................
3 - 42
Xcom menu
Figure 3-35.
8DG08136EAAA
Issue 3 July 2009