Advertisement
Setting and Transmitting Call Tones
Noise Filtering
Your radio can transmit different call tones to other radios in
The
noise-filtering feature helps to ensure uninterrupted
your group so you can alert them that you want to talk. Your
communication with other Motorola Solutions radios that have
radio has 20 call tones from which to choose.
this feature. This feature also filters out unwanted transmissions
To set a call tone:
from other radios. This is useful in places where there is heavy
radio traffic, such as amusement parks or ski resorts.
1.
Press
until
appears. The current call tone setting
Note:
noise filtering is not available when the radio is
will flash.
scanning.
2.
Press
or
to change and hear the call tone.
extended battery save is set to L1, L2 or L3. In
consequence the
3.
Press the PTT button to set the new call tone or
to
must set extended battery save to L0 in order to activate
continue set up.
noise filtering.
To transmit your call tone to other radios set up to the same
channel and Interference Eliminator Code as your radio, press
To turn
.
1.
Press
Note: Setting the call to OFF disables the call tone feature.
flash.
Hands-Free Use Without Accessories (
)
2.
Press
3.
Press the PTT button to set or
You can use the
feature to transmit hands-free without
the need for any headset accessories. Once
is turned on,
To transmit to a radio that has
the radio detects your voice and transmits when you speak into
1.
Select the same channel and Interference Eliminator
the internal microphone.
Code as the other radio.
1.
Press
until
appears on the display. The current
2.
Press
setting will flash.
pass through the
2.
Press
or
to select On or Off or set sensitivity L1,
3.
Press the PTT button and speak normally.
L2 or L3.
Note: Without first pressing
3.
Press the PTT button to set or
to continue set up.
heard. After this, for a 30-second period, starting after the
last transmission, all transmissions received on the
Hands-Free Use with Accessories (
)
selected channel and code will pass through the noise
filter. When radio goes to idle,
You can transmit hands-free more reliable with the use of
again to allow communication to pass through.
optional headset accessories. Once
is turned on, the
radio detects your voice and transmits when you speak.
VibraCall
Many accessories (sold separately) are available for your radio.
For more information, visit our website at
TM
VibraCall
www.motorolasolutions.com/TalkaboutAccessories or call
receiving a message. This is useful in noisy environments.
1-800-448-6686.
When the alert is on, the radio vibrates once every 30 seconds
1.
Turn the radio off and plug the
accessory into the
when you receive a message on the channel and code you set.
accessory port.
2.
Turn the radio on.
shows on the display.
1.
To turn vibrating alerts on, press
The current setting will flash.
3.
Adjust the volume appropriately by rotating
. Lower the
volume before placing the accessory on your head or in
2.
Press
your ear.
3.
Press the PTT button to confirm or
4.
To turn off, simply remove accessory.
Note: VibraCall
Note: There is a short delay between the time you start talking
Keypad Tones
and when the radio transmits. There is a short delay
before the transmission is completed.
You may enable or disable the speaker key tones. You will hear
Setting the Sensitivity Level When in
Mode
the key tone each time a button is pushed.
1.
Press
Adjusting the sensitivity level of the radio helps minimize the
flash.
possibility of unintended noises triggering a transmission and
helps the radio pick up soft voices.
2.
Press either
1.
Press
until
appears. The current setting
3.
Press the PTT button to confirm or
(L1 – L3) will flash.
Note: When the key tone feature is off, the following are not
2.
Press
or
to select the sensitivity level.
disabled:
3.
Press the PTT button to set or
to continue set up.
•
Transmit timeout alert tone
•
Call tone
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most environments
•
Low battery alert tone or
•
The transmitted talk confirmation tone
L1 = Low Sensitivity for noisy environments
Transmitting a Talk Confirmation Tone
Note: When you connect a headset, the radio is automatically
You can set your radio to transmit a unique tone when you finish
set to the last chosen sensitivity level.
transmitting. It is like saying "Roger" or "Over" to let others know
Setting the Extended Battery Save Level (
)
you are finished talking.
This feature puts the radio into a low power "sleep" mode for
1.
With the radio on, press
current setting On/Off flashes.
cycle periods of 1, 2 or 3 seconds. The radio will briefly check
for any channel activity after each sleep cycle. The sleep cycle
2.
Press
repeats until a key is pressed or a call is received.
3.
Press the PTT button to set or
1.
Press
until
appears. The current setting (L0, L1,
L2 or L3) will flash.
2.
Press
or
to select the battery save level.
Emergency Alert Mode
3.
Press the PTT button to set or
to continue set up.
The Emergency Alert feature can be used to signal members in
L0 = Normal battery save mode
your group of your need for urgent help. T4XX series radios will
L1 = 1 second extended battery save mode (low setting)
L2 = 2 seconds extended battery save mode (mid setting)
operate in an automatic "hands-free" emergency control mode
L3 = 3 seconds extended battery save mode (max setting)
for a total of 30 seconds after activating the Emergency Alert.
T4XX series radios in your group will automatically advance the
speaker volume to the maximum setting and sound a warbling
Note:
alert tone for 8 seconds. The alert tone is emitted from your own
1.
Signals received during the sleep period will not be heard
radio speaker and the receiving radios in your group. After the 8
until after the timer period expires. The first 1 – 3 seconds
second alert, any spoken words or incidental sounds at your end
of speech can be missed. Do not use
(battery save)
will be transmitted to the group for 22 seconds. For the 30
L1, L2 or L3 settings when immediate response may be
second duration of Emergency Alert mode, T4XX series radio
required.
controls and buttons will be locked to maximize reception of the
emergency message.
2.
,
,
and
modes are not available with
1.
Press and hold the Emergency Alert button for 3 seconds.
extended battery save mode. Using
,
,
or
2.
Release the button the alert tone begins to sound. There
enabling
will necessarily disable the extended sleep
is no need to continue to hold the Emergency Alert button
cycle battery settings.
or use PTT for your message to be transmitted.
3.
Maximum battery life savings may be achieved only when
3.
After the alert tone ends you may speak into the
usage is primarily in standby mode and very little TX or RX
microphone. Your voice or incidental sounds will be
(talking or listening) use occurs. When RX or TX are often
transmitted.
used, little or no battery life extension will occur.
4.
After 30 seconds your radio speaker will emit a Talk
Confirmation Tone. Operation then returns to normal
two-way mode.
Note: All Motorola Talkabout EM, MJ, MR, MT, MU and T4XX
series radios (except for model T400) are fully compatible
with the Emergency Alert feature. Radios other than EM,
MJ and MR series can receive the emergency alert
signal, but will not respond with adjusted volume settings,
locked controls or a warbling alert tone. Users of other
radio models set to the same channel and Interference
Eliminator Code will hear a steady tone for 8 seconds
followed by the voice transmission for 22 seconds.
noise filtering is not available when
WARNING: The Emergency Alert feature should only be
will not appear in the Menu. You
used in the event of an actual emergency.
Motorola Solutions is not responsible if there is
no response to the emergency alert from the
on or off:
receiving group.
Built-in LED Flashlight with Power Outage Function
until
displays. The current setting On/Off will
Press the flashlight button to turn and keep the light on. Press
or
to select On or Off.
the flashlight button again, the light is off.
to continue set up.
Note: Turn off the flashlight when not in use to conserve battery
noise filtering turned on:
power.
Keypad Lock
To avoid accidentally changing your radio settings:
to send a call tone. This allows your voice to
noise filter on the receiving radio.
1.
Press and hold
2.
When in lock mode, you can turn the radio on and off,
, your message will not be
adjust the volume, receive, transmit, send a call tone and
monitor channels. All other functions are locked.
3.
To unlock the radio, press and hold
longer displayed.
will need to be pressed
Scanning Channels
TM
Alert
Use scan to search the 22 channels for transmissions from
unknown parties, to find someone in your group who has
is a vibrating alert that notifies you that your radio is
accidentally changed channels or to quickly find unused
channels for your own use.
There is a priority feature and 2 modes of scanning (basic and
advanced) to make your search more effective. The basic scan
mode uses the channel and code combinations for each of the
until
is displayed.
22 channels as you have set them (or with the default code
value of 1). The "Advanced Scan" mode will scan all channels
for any and all codes, detect any code in use and use that code
or
to change the setting to On/Off.
value temporarily for that channel.
to continue set up.
Priority is given to the "home channel", that is, the channel (and
TM
Alert is not applicable for model T400.
Interference Eliminator Code) your radio is set to when you start
the scan. This means the initial channel (and code settings) is
scanned more often than the other 21 channels and your radio
will respond quickly to any activity occurring on the home
channel as a priority.
To start Scanning:
until
appears. The current setting On/Off will
1.
Briefly press the
or
to turn On or Off.
display and the radio will begin to scroll through the
channel and code combinations.
to continue set up.
2.
When the radio detects channel activity matching the
channel and code combination, it stops scrolling and you
can hear the transmission.
3.
To respond and talk to the person transmitting, press the
PTT button within five seconds after the end of the
transmission.
4.
The radio will resume scrolling through the channels five
seconds after the end of any received activity.
5.
To stop scanning, briefly press the
To start Advanced Scanning
1.
Set the Interference Eliminator Code to "zero" or OFF.
2.
Briefly press the
until the
appears. The
display and the radio will begin to scroll through the
channels. No Interference Eliminator Codes will filter what
or
to turn On or Off.
is heard.
to continue set up.
3.
When the radio detects channel activity with ANY code (or
NO code), it stops scrolling and you can hear the
Special Features
transmission. Any Interference Eliminator Code that may
be in use by that party will be detected and displayed.
4.
To respond and talk to the person transmitting, press the
PTT button within five seconds of the end of the
transmission. The radio will transmit using the newly
detected Interference Eliminator Code.
5.
The radio will resume scrolling through the channels five
seconds after the end of any received activity.
6.
To stop scanning, briefly press the
Scanning Notes:
1.
If you press the PTT button while the radio is scrolling
through inactive channels, the transmission will be on the
"home channel". Scanning will resume five seconds after
the end of your transmission. You may press the
to stop scanning at any time.
2.
If the radio stops on an undesired transmission, you may
immediately resume the scan by briefly pressing
.
3.
If the radio repeatedly stops on an undesired
transmission, you may temporarily remove that channel
from the scan list by pressing and holding
three seconds. You may remove more than one channel in
this way.
4.
To restore the removed channel(s) to the scan list, turn the
radio off and then turn back on, or exit and re-enter the
scanning mode by pressing
5.
You cannot remove the home channel from the scan list.
6.
In Advanced Scan, the detected code will only be used for
one transmission. You must note that code, exit scan and
set that detected code on that channel to permanently use
the detected code.
Weather Receiver
Your radio can tune in to broadcasts by the United States
National Oceanic and Atmospheric Administration (NOAA)
Weather Radio and Environment Canada Weather Radio.
You can listen to a weather channel (see "Weather Channels
and Frequencies" table for details) or set your radio to alert you
to emergency weather broadcasts that interrupt routine
broadcasts. When you listen to a weather channel, you cannot
use your radio in scan mode or for two-way communications.
Both NOAA and Environment Canada have transmitters located
throughout the United States and Canada, respectively. These
transmitters broadcast watches, forecasts and other information
24 hours a day.
Note: NOAA weather radio stations are assigned to cover
specific areas and service may be limited. Please check
until
displays.
with your local weather office for frequency and details or
visit www.weather.gov/nwr in the US to view the
appropriate transmitter for your area. The use of the
NOAA logo does not provide an endorsement or implied
endorsement by the National Weather Service of NOAA,
until
is no
nor does the use of the Weatheradio logo provide an
endorsement or implied endorsement by Environment
Canada.
Entering Weather Mode
1.
From two-way mode, press
MODE
.
Setting the Weather Channel
Your radio receives weather frequencies:
1.
In weather mode, press
until weather channel number
flashes.
2.
Press
or
to select the appropriate channel with
good reception in your area.
3.
Press the PTT button to set or
weather alert.
Setting the Weather Alert
Your radio can be set to respond to NOAA Weather Radio
emergency messages. A special alarm tone sounds an alert and
turns on the weather receiver to give you immediate weather
key. The scan
will appear in the
and emergency information.
1.
In weather mode press
twice until
2.
Press
or
to select On/Off.
3.
Press the PTT button or
to exit the weather menu set
up.
4.
Press
to return to two-way mode. If you activate
MODE
Weather Alert and return to two-way mode
display.
Note:When the weather channel is activated, either manually or
key.
after receiving an alert, and no buttons are pressed for 5
minutes, the weather mode will automatically revert back
to two-way mode.
As with two-way radio reception, weather channel reception
key. The scan
will appear in the
depends on how close you are to a transmitter and whether you
are indoors or outdoors. Because weather channels are
transmitted without codes, they may contain static or noise.
Weather Alert will not function while actively transmitting or
receiving in two-way mode.
Weather Channels and Frequencies
Weather Channel
Frequency
Weather Channel
WX1
162.550 MHz
WX2
162.400 MHz
WX3
162.475 MHz
WX4
162.425 MHz
WX5
162.450 MHz
.
WX6
162.500 MHz
Channels and Frequencies
Channel Frequency Description Channel Frequency Description
1
462.5625 MHz GMRS/FRS
12
key
2
462.5875 MHz GMRS/FRS
13
3
462.6125 MHz GMRS/FRS
14
4
462.6375 MHz GMRS/FRS
15
or
5
462.6625 MHz GMRS/FRS
16
6
462.6875 MHz GMRS/FRS
17
7
462.7125 MHz GMRS/FRS
18
8
467.5625 MHz
FRS
19
or
for
9
467.5875 MHz
FRS
20
10
467.6125 MHz
FRS
21
11
467.6375 MHz
FRS
22
Patent and Copyright Information
.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the
Stylized M logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2015 Motorola Solutions, Inc. All rights reserved.
Warranty
Consumer Two-Way Radio Products and
Accessories purchased in the United States or
Canada
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola Solutions,
Inc. ("Motorola") warrants the Motorola branded consumer
two-way radios that operate via Family Radio Service or
General Mobile Radio Service ("Products"), the Motorola
branded or certified accessories sold for use with these
Products ("Accessories") to be free from defects in materials
and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is the exclusive
remedy of a consumer, and applies as follows to new Products
and Accessories and purchased by consumers in the United
States or Canada, which are accompanied by this written
warranty:
Who is Covered?
This warranty extends only to the first consumer purchaser, and
is not transferable.
What will MOTOROLA SOLUTIONS, INC. do?
Motorola Solutions, Inc., at its option, will at no charge repair,
replace or refund the purchase price of any Products or
to enter weather mode
Accessories that do not conform to this warranty. We may use
functionally equivalent reconditioned/ refurbished/ pre-owned or
new Products or Accessories.
What Other Limitations Are There?
Any Implied Warranties, Including Without Limitation
The implied warranties of merchantability and fitness for a
particular purpose, shall be limited to the duration of this limited
warranty, otherwise the repair, replacement, or refund as
provided under this express limited warranty is the exclusive
to continue set up
remedy of the consumers, and is provided in lieu of all other
warranties, express or implied. In no event shall Motorola
Solutions be liable, whether in contract or tort (including
negligence) for damages in excess of the purchase price of the
product or accessory, or for any indirect, incidental, special or
consequential damages of any kind, or loss of revenue or
profits, loss of business, loss of information or other financial
loss arising out of or in connection with the ability or inability to
use the products or accessories to the full extent these
displays.
damages may be disclaimed by law.
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation
on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you
will
specific legal rights, and you may also have other rights that
vary from state to state or from one jurisdiction to another.
Products Covered
Length Of Coverage
Products and
Accessories
as defined above, unless
otherwise provided for
One (1) year from the date of
below:
purchase by the first consumer
purchaser of the product unless
Batteries
otherwise provided for below.
whose fully charged
capacity falls below 80% of
their rated capacity and
batteries that leak
Products and
The balance of the original
Frequency
Accessories
warranty or for ninety (90) days
that are repaired or
from the date returned to the
WX7
162.525 MHz
replaced
consumer, whichever is longer.
WX8
161.650 MHz
WX9
161.775 MHz
WX10
161.750 MHz
WX11
162.000 MHz
467.6625 MHz
FRS
467.6875 MHz
FRS
467.7125 MHz
FRS
462.5500 MHz
GMRS
462.5750 MHz
GMRS
462.6000 MHz
GMRS
462.6250 MHz
GMRS
462.6500 MHz
GMRS
462.6750 MHz
GMRS
462.7000 MHz
GMRS
462.7250 MHz
GMRS
Exclusions From Warranty Coverage
Normal Wear and Tear:
Periodic maintenance, repair and replacement of Products or
Accessories due to normal wear and tear.
Abuse & Misuse:
Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the
Products and Accessories resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration,
sand, dirt or the like, extreme heat, or food; (c) use of the
Products or Accessories for commercial purposes or
subjecting the Product or Accessory to abnormal usage or
conditions; or (d) other acts which are not the fault of Motorola.
Use of Non-Motorola branded Products and Accessories:
Defects or damage that result from the use of Non-Motorola
branded or certified products, accessories, software or other
peripheral equipment.
Unauthorized Service or Modification:
Defects or damages resulting from service, testing,
adjustment, installation, maintenance, alteration, or
modification in any way by someone other than Motorola or its
authorized service centers.
Altered Products:
Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken
seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts.
Communication Services:
Defects, damages, or the failure of Products or Accessories
due to any communication service or signal you may subscribe
to or use with the Products or Accessories.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call
USA and Canada Two-Way Radios
1-800-448-6686.
www.motorolasolutions.com/talkabout
For Accessories:
Please call the telephone number designated above for the
Product with which they are used.
You will receive instructions on how to ship the Products or
Accessories at your expense, to Motorola or a Motorola
Authorized Repair Center. To obtain service, you must include:
(a) a copy of your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the problem; (c) the
name of your service provider, if applicable; (d) the name and
location of the installation facility (if applicable) and, most
importantly; (e) your address and telephone number.
For more information, please visit us at:
https://www.facebook.com/
MotorolaTalkaboutWalkieTalkies
http://bit.ly/Talkabout
www.motorolasolutions.com/talkabout
Advertisement
