Set Up An Ipv6 6To4 Tunnel Internet Connection - NETGEAR WNDR4500v3 User Manual

A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
5. In the Internet Connection Type list, select 6rd Tunnel.
The router detects the service provider's IPv4 network and attempts to establish an IPv6
6rd Tunnel connection. If the IPv4 network returns 6rd parameters to the router the
screen adjusts to display the correct settings in the 6rd Configuration section.
6. If necessary, manually change the fields in the 6rd Configuration section.
7. Click the Apply button.
Your settings are saved.

Set Up an IPv6 6to4 Tunnel Internet Connection

The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the
IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:

1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
N900 WiFi Router
Specify Your Internet Settings
30