Table of Contents
Advertisement
4 Configuration
Select packet type based on MAC address, IPv4 address, IPv6 address or packet content. This will change
the window according to the requirements for the type of profile.
MAC: Defines the ACL profile Layer 2 protocols. Select MAC to monitor MAC address of each packet.
IPv4: Defines the IPv4 ACL profile protocols. Select IPv4 to monitor IPv4 address of each packet.
IPv6: Defines the IPv6 ACL profile protocols. Select IPv6 to monitor IPv6 address of each packet.
To define the MAC ACL Rule: Select MAC click Next button. The updates to show the follows:
Assign sequence number:
Sequence No. (1-65535): Specify the sequence number. The value is from 1 to 65535.
Auto Assign: Auto assign the sequence number for a new rule.
Assign Rule Criteria: Specify the MAC address settings.
Source: Select the source MAC to be specified or Any. Enter a source MAC address and source MAC mask,
e.g. FF-FF-FF-FF-FF-FF.
Destination: Select the destination MAC to be specified or Any. Enter a destination MAC address and
destination MAC mask, e.g. FF-FF-FF-FF-FF-FF.
If user selects the 802.1Q VLAN box, then need to specify the dot1p and VLAN ID.
Dot1p (0-7): Specify the dot1p priority.
VLAN ID: Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the, or part of the criterion for forwarding.
If user selects the Ethernet Type box, then need to specity the Ethernet Type and select the Action.
Ethernet Type: Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Action: Specify the ACL forwarding action matching the rule criteria. Permit forwards packets if all other
ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Priority (0-7): Specify the MAC ACL priority whish values are 0-7.
Replace Priority: Check the box to enable the Replace Priority feature.
Click Next button then the ACL profile is added.
To define the IPv4 ACL Rule: Select IPv4 with ICMP click Next button. The updates to show the follows:
Figure 4.99 – Add Access Rule - MAC
7
7
3
3
D-Link Web Smart Switch User Manual
Advertisement
Table of Contents
