Traction Control; Principle Of Operation; Switching The System Off; Using Traction Control - Ford 2016 Mustang Owner's Manual

PRINCIPLE OF OPERATION

The traction control system helps avoid
drive wheel spin and loss of traction.
If your vehicle begins to slide, the system
applies the brakes to individual wheels
and, when needed, reduces engine power
at the same time. If the wheels spin when
accelerating on slippery or loose surfaces,
the system reduces engine power in order
to increase traction.

USING TRACTION CONTROL

WARNING
The stability and traction control
light illuminates steadily if the
system detects a failure. Make sure
you did not manually disable the traction
control system using the switch. If the
stability control and traction control light
is still illuminating steadily, have the
system serviced by an authorized dealer
immediately. Operating your vehicle with
traction control disabled could lead to an
increased risk of loss of vehicle control,
vehicle rollover, personal injury and death.
The system automatically turns on each
time you switch the ignition on.
If your vehicle is stuck in mud or snow,
switching traction control off may be
beneficial as this allows the wheels to spin.
Note: When you switch traction control off,
stability control remains fully active.
Mustang (CZG) Vehicles Built From: 13-07-2015, GR3J 19A321 AKA enGBR, Edition date: 06/2015, First Printing

Traction Control

Switching the System Off

E166706
The switch for the stability and traction
control system is on the instrument panel.
When you switch the system off, a
message and an illuminated icon appear
on the instrument cluster.
Use the switch again to return the traction
control system to normal operation.
Your vehicle may have MyKey restrictions
regarding this feature. See (page 35).
System Indicator Lights and
Messages
E138639
when a driving condition activates either
of the systems.
•
•
117
The stability and traction control
light temporarily illuminates on
engine start-up and flashes
The stability and traction control
off light temporarily illuminates
on engine start-up and stays on:
When you switch the traction control
system off.
If a problem occurs in either of the
systems.