Replacing Headlamp Bulbs - Ford 2016 ESCAPE Owner's Manual

Replacing Headlamp Bulbs

WARNING
Handle a halogen headlamp bulb
carefully and keep out of children's
reach. Grasp the bulb by only its
plastic base and do not touch the glass.
The oil from your hand could cause the
bulb to break the next time the headlamps
are operated.
Note: If the bulb is accidentally touched, it
should be cleaned with rubbing alcohol
before being used.
Headlamp:
A B
E142469
A Side marker
B Low beam headlamp
C High beam headlamp
High beam headlamp:
Escape/Kuga (TM2), enUSA, First Printing
Maintenance
C
227
2 4
E142470
1. Remove the headlamp.
2. Remove service cap.
3. Disconnect the electrical connector.
4. Remove bulb from the headlamp
assembly by turning it
counterclockwise, then pull it straight
out.
Low beam headlamp:
2 4
E142471
1. Remove the headlamp.
2. Remove service cap.
3. Disconnect the electrical connector.
4. Remove bulb from the headlamp
assembly by turning it
counterclockwise, then pull it straight
out.